boot config logfile

Configure log file parameters.

  • The log file is named using an 8.3 (xxxxxxxx.sss) format.

  • The first six characters of the file name contain the last three bytes of the chassis base MAC address.

  • The next two characters specify the slot number of the CP that generated the logs.

  • The last three characters denote the sequence number of the log file.

Multiple sequence numbers are generated for the same chassis and same slot, if the maximum log file size is reached.

Syntax

Command Parameters

<10-90>
Specifies the maximum percentage, from 10-90%, of space on /intflash the log file can use. Although you can currently use this parameter, it does not alter the configuration.
<500-16384>
Specifies the maximum size of the log file from 500-16384 KB.
<64-500>
Specifies the minimum free memory space on /intflash from 64-500 KB. Although you can currently use this parameter, it does not alter the configuration.

Default

None

Command Mode

Global Configuration

Usage Guidelines

The maximum number of log files is 1,000. The maximum size of one log file is 1,024 KB.

9039033-00 Rev AA